Pole Mount

Pole Mount is an aluminium tensioned post with point fixing to post.

Description / Features Pole Mount is an aluminium tensioned post with point fixing to post. Pole Mount allows for smaller screens to be used in a floor to ceiling system.
How to specify 1. Seen or Unseen
2. Offset off wall required
3. Diameter of Head
Composition Post - Aluminium, Point Fix - stainless steel
Surface Finish Pole and Coverplates- raw aluminium with Powdercoat finish

Point Fix - brushed stainless steel
Finishes Available Satin Black, Satin White or Precious Silver Pearl
Standard Size 48" x 108" x 0.5" (1219mm x 2743mm x 12mm)
Indoor/Outdoor Indoor only
Wet Areas No
Suggested Installation See Install Guide for details.
Requires rigid floor and ceiling.

Fixed to floor and tensioned to ceiling with adjustable fitting.
Customisable Height and width of placement
Thermoformable No
Fire Rating ASTM E-84 - Class A
E-13501 - B-s2-d0
AS 5637.1:2015 - Group 1
Additional Comments Suitable for installation of Zintra Acoustic Panel, Lucere, Lightblocks Ice and Screens, the Pole Mount system is sold as a complete set with two tubes, screen fixings, base plate, cover plate and tensioners

Standard poles come at 3000mm L and cut be cut onsite as required

Allows for smaller screens to be used in a floor to ceiling system

Sturdy assembly with rigid pole fixing inset from each back side of screen or panel

Secured with bolts into ground and covered with a powdercoat spun cover

6 fixings supplied with corresponding holes drilled into screen for assembly onsite
Supplied As 1 Pole Mount System:

2 x channel extrusions PC finish

2 x Coverplates PC finish

2 x mild steel fixing plates

2 x levelling feet

4 x threaded lug

6 x curved head screws and fix heads

(no floor/ceiling fixings supplied)
Fabrication Utility knife or CNC with an oscillating knife
Refinishable No
Care Instruction Remove spills immediately using damp, clean cloth.

Dab Zintra with a clean, soft white cloth dampened with a mild solution of liquid detergent and warm water. Repeat using only clean water, then pat dry with a lint free cloth.

Avoid using wax polishes, solvents or concentrated abrasives.

For more difficult stains, dampen a soft white cloth with a solution of household bleach (10% bleach / 90% water). Dab gently. Repeat using only a clean, water dampened cloth to remove bleach concentration then pat dry with a lint free cloth.

Always test in an inconspicuous area first. If care instructions don't deliver the expected results, cease cleaning method immediately and contact Baresque for assistance.
Environmental Information We believe in the sustainability of both our planet and our people. We do everything we can to minimise our environmental impact and
create spaces that contribute to the wellness of the people that use them.

Certified by Declare and HPD, Zintra is made from 100% recyclable materials. It has low levels of volatile organic compounds and contains no formaldehyde. It’s Red List Free and meets the Global Recycling Standard.

Reducing noise levels, minimizing indoor air pollutants, easy cleaning and a Class A fire rating are just a few of the reasons that Zintra is the perfect material for the green buildings of today and tomorrow.
Product specification Download >