product-specs
| Description / Features | Stainless steel point fixing for offset wall installation |
| How to specify |
1. Seen or Unseen 2. Offset off wall required 3. Diameter of Head |
| Composition | Stainless Steel |
| Surface Finish | Satin polished stainless steel |
| Finishes Available |
Zintra Plain 1/2" (12mm) Color Range Zintra Timber 1/2" (12mm) Color Range |
| Standard Size | 48" x 108" x 0.5" (1219mm x 2743mm x 12mm) |
| Indoor/Outdoor | Indoor only |
| Wet Areas | No |
| Suggested Installation | Screw fixed to wall |
| Customisable | Yes. Custom offset lengths available on request. Longer leadtime and charges apply. |
| Thermoformable | No |
| Fire Rating |
ASTM E-84 - Class A E-13501 - B-s2-d0 AS 5637.1:2015 - Group 1 |
| Additional Comments |
Point Fix is available in a number of different options and is suitable for installing Zintra Acoustic Panel, Lightblocks Ice, Lucere and Screens. Contact Baresque if you need help matching to your project requirements. FX19.PO.FI 19mm DIA fixing head and body. Designed for the small head to minimise the front detail on the screen. Body can be purchased in 10mm, 20mm, 30mm or 50mm. Body is fixed to wall/substrate and screen sandwiched between body and head with threaded rod. FX19.PO.FI.THRU 19mm DIA fixing head and body. Designed for thinner screens with standard screw fixing to wall, the head has a thread on it for fixing through the screen to body with the hole in the screen larger to compensate for this. Only available in 20mm offset. FX25.PO.FI 25mm DIA Fixing head and body. Designed for the slightly larger head to showcase fixings on front side of screens/panel.Body can be purchased in 20mm, 30mm, 50mm or 100mm. Body fixed to wall/substrate and screen sandwich between body and head with threaded rod. FX25.PO.FI.USP 20mm body with brass clap adaptor and screw for fixing onto back only. This option cannot be used with glass, Lightblocks Board or Lucere screens. Can only be used when screen is ply backed for screw to be drilled into. |
| Supplied As | Sold individually. 1 x fixing to wall. |
| Fabrication | Utility knife or CNC with an oscillating knife |
| Refinishable | No |
| Care Instruction | Remove spills immediately using damp, clean cloth. Dab Zintra with a clean, soft white cloth dampened with a mild solution of liquid detergent and warm water. Repeat using only clean water, then pat dry with a lint free cloth. Avoid using wax polishes, solvents or concentrated abrasives. For more difficult stains, dampen a soft white cloth with a solution of household bleach (10% bleach / 90% water). Dab gently. Repeat using only a clean, water dampened cloth to remove bleach concentration then pat dry with a lint free cloth. Always test in an inconspicuous area first. If care instructions don't deliver the expected results, cease cleaning method immediately and contact Baresque for assistance. |
| Environmental Information | We believe in the sustainability of both our planet and our people. We do everything we can to minimise our environmental impact and create spaces that contribute to the wellness of the people that use them. Certified by Declare and HPD, Zintra is made from 100% recyclable materials. It has low levels of volatile organic compounds and contains no formaldehyde. It’s Red List Free and meets the Global Recycling Standard. Reducing noise levels, minimizing indoor air pollutants, easy cleaning and a Class A fire rating are just a few of the reasons that Zintra is the perfect material for the green buildings of today and tomorrow. |
